10 GBd SMF XFP Transceiver for 10GbE and 10GFC, -5 to +70C, RoHS Compliant

The Avago AFCT-721XPDZ 1310 nm XFP transceiver is a high performance, cost effective module for serial optical data communications applications specified for signal rates of 10.30 Gb/s to 11.3 Gb/s. It is compliant to XFP MSA Rev 4.5.

The module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section incorporates Avago Technologies’ uncooled directly modulated 1310 nm distributed feedback laser (DFB). The receiver section uses Avago's MOVPE grown planar TEDET PIN photodetector for low dark current and excellent responsivity.

Integrated Tx and Rx signal conditioners provide high jitter-tolerance for full XFI compliance.

수명주기 상태를:Active

• RoHS-6 Compliant
• Supports 10.3Gb/s to 11.3Gb/s bit rates
• Compliant to XFP MSA
• Supports 10Gb/s Ethernet and Fibre Channel
• IEEE 802.3ae 10GBASE-LR for 10GbE, 10.3125 Gb/s
• 10GFC 1310 nm Serial PMD, type 1200-SM-LL-L, 10.51875 Gb/s
• Avago Technologies’ uncooled 1310 nm DFB Laser and PIN Photodiode
• Compliant XFI 10G Serial electrical interface
• LC Duplex optical connector interface conforming to ANSI TIA/EIA604-10 (FOCIS 10)
• 1.5W typical power dissipation
• No Reference Clock required
• Superior Thermal and EMI integrity performance to support high port densities
• Customizable clip-on heatsink to support a variety of line card environments
• -5 to +70 °C case operating temperature range
• Support XFI loopback
• 2-wire serial management interface provides real time monitors of:
  • Transmitted Optical Power
  • Received Optical Power
  • Laser Bias Current
  • Module Temperature
• Link Lengths up to 10 km with 9 μm fiber
• IEC 60825-1 Class 1/CDRH Class 1 laser eye safety.

• Fibre Channel Switches
• Host Bus Adapter Cards
• Mass Storage System and Server I/O
• Ethernet Switches
• Core Routers

데이터 시트 및 기술 사양

• Data Sheet - AFCT-721XPDZ, 10GbE/10GFC 1310 nm XFP 10 Gbit/s Optical Transceiver(504 KB,PDF)